I’m Jules…
and I also make Trailers
I’m Jules…
and I also make Trailers
About My Trailers
Why should you choose to buy an aluminium trailer over a traditional galvanised trailer?
- These trailers are light to tow yet very strong due to the design and construction. Aluminium weighs around a third of the weight of steel meaning much less stress on the towing vehicle and better fuel economy and they can be towed by a smaller car.
- Fully welded construction by a trade qualified engineer.
- NZ made. Yes, these trailers may cost a little more than the cheap ones mass produced in China, or a bolt together kit from overseas then assembled in NZ, but you are buying a far superior, more reliable product with guaranteed workmanship.
- Not prone to rust.
- Easy to move around when unhitched.
Our Options
Trailer Features
- All aluminium construction except for wheels, ply deck and axle.
- Useable area inside tray 2440mm x 1220mm
- A choice of 750kg or 1000kg rated springs
- 13″ or 14″ wheels
- 1600mm long heavy duty drawbar
- 300mm sides
- LED lightbar
- Tie rails down both sides of the trailer
- Superior quality made right here in New Zealand
Removable aluminium cages
Cages can add greatly to the carrying capacity of your trailer for such tasks as shifting house, firewood gathering and the like. The 750mm cage combined with the 300mm sides give a carrying capacity of 3.125 m3
The cage frame is made out of 40 x 40 x 3mm aluminium square tube with aluminium security mesh panels welded to the frame. Security mesh is super tough and can take a knock especially helpful for transporting firewood and furniture. The mesh is really great for tying bungee cords to as well.
It can be easily removed by one person in a matter of a few minutes via 4 or 6 bolts.
Add Ons
Make your trailer work for you with an assortment of add ons.
- A- Frame base
- Kayak brackets and cradles
- Gib / sheet stacking kit.
- Advertising
- PVC covers
- H bars
- Drawbar toolbox
- Heavy duty loading ramps
Check out all the options
Aluminium Trailers
Removable Aluminium Cages
Add ons to suit your needs
Aluminium Trailers
Removable Aluminium Cages
Add ons to suit your needs
8′ x 4′ Aluminium Trailers
Our trailers are light to tow yet very strong due to the design and construction. Aluminium weighs around a third of the weight of steel meaning much less stress on the towing vehicle and better fuel economy. They can be towed by a smaller car.
- Fully welded construction by a trade qualified engineer.
- NZ made. Yes, these trailers may cost a little more than the cheap ones mass produced in China, or a bolt together kit from overseas then assembled in NZ, but you are buying a far superior, more reliable product with guaranteed workmanship.
- Not prone to rust.
- Easy to move around when unhitched.
Specs / Features
- All aluminium construction except for wheels, ply deck and axle.
- Useable area inside tray 2440mm x 1220mm
- A choice of 750kg or 1000kg rated springs
- 13″ or 14″ wheels
- 1600mm long heavy duty drawbar
- 300mm sides
- LED lightbar
- Tie rails down both sides of the trailer
Removable Aluminium Cages (750mm high)
Cages can add greatly to the carrying capacity of your trailer for such tasks as shifting house, firewood gathering and the like. The 750mm cage combined with the 300mm sides give a carrying capacity of 3.125 m3
The cage frame is made out of 40 x 40 x 3mm aluminium square tube with aluminium security mesh panels welded to the frame. Security mesh is super tough and can take a knock especially helpful for transporting firewood and furniture. The mesh is really great for tying bungee cords to as well.
It can be easily removed by one person in a matter of a few minutes via 4 or 6 bolts.
Features:
- 3 welded sides plus rear gate fitted with a key lockable latch.
- Can be fitted with a PVC or canvas cover. (these would come with curved canopy bows x 4 to prevent water pooling on the roof.)
The addition of a cover makes the trailer/cage even more versatile because it can be used to:
- Store gear or sporting equipment for school trips in any weather
- Camping gear
- Keep lawnmowers, ride-on mowers, tools etc dry.
* Custom made cages of any size can be made to fit your existing trailers also.
Add Ons
A wide assortment of add ons are available for your trailer turning it from a workhorse to your go to for all your leisure activities. These include:
* ‘A’ Frame base
*Kayak brackets and cradles
* Gib / sheet stacking kit.
* Advertising
* PVC covers
* H bars
* Drawbar toolbox
* Heavy duty loading ramps
* Jockey wheels / Spare wheels
For more information on these productskeep scrolling.
'A' Frame Base
This versatile bolt on addition to your trailer can be a base for other multifunctional add ons to suit their purpose. Heavy duty aluminium construction. Powdercoated in your choice of colour.
Gib board/Sheet stacking kit
Stack up to 30 sheets (15 each side) of 10mm Gib board vertically on both sides of the ‘A’ frame. Makes accessing and moving the sheets at the other end easy and at a good handling height. Lock them in with the keeper brackets on the slotted slides via a stainless steel wingnut.
Kayak Transportation kit
Bolt on brackets and cradles to the ‘A’ frame. Keep all that nasty saltwater off the roof of your vehicle after a fishing session. Can accomodate up to 3 large fishing kayaks. Store your paddles down the centre. A fishing gear box can be manufactured, powdercoated and shaped to fit to the drawbar.
Suggestion: The unbolted ‘A’ frame fitted with the kayak brackets and cradles can be used to store kayaks when not in use or in the winter months to keep them off the ground.
Advertising
Make a statement when driving around- Why not promote your business or upcoming events via advertising pinned to both sides of the ‘A’ frame? Large signage panels can be made to fit the ‘A’ frame and be highly visible when stationery or on the move. The signage could be made to be easily removable to keep the multifunctionality of the ‘A’ frame.
H Bars
Transport longer lengths of timber, ladders etc above the height of the trailer sides on H bars. These can be custom made to your requirements.
Construction: 80 x 50 x 3mm aluminium RHS
Dimensions: 1215mm (wide) x 930mm (high)
Bolt on removable.
* Can be made to fit on top of the trailer cage also.
Heavy Duty Loading Ramps
Used to load heavier items on wheels such as motorbikes or ride on mowers. I use these ramps to get my ride on mower onto the trailer when it needs to go for servicing.
2750mm x 300mm
Canopy bows and PVC or Canvas covers
Being covered in and waterproof can greatly increase the functionality of your trailer especially on camping trips, transporting items in wet weather, sports trips etc.
Drawbar Toolbox
Can be manufactured, powdercoated and fitted to the drawbar or separately to your size requirements. Waterproof and lockable.
Warranty Information
- 3 year structural warranty and an 12 month warranty on the parts.
- General wear and tear or misuse is not covered by the warranty
Prices
As there are so many options for you to choose from I find it best to discuss your exact needs in order to give you the best price. Please get in touch for a no obligation quote using the form below or give me a call on 021 205 7752